Configuring Hook Flash
The following procedure describes how to configure various hook-flash features.
|
➢
|
To configure hook-flash features: |
|
1.
|
Configure the digit pattern used by the Tel side to indicate a hook-flash event: |
|
a.
|
Open the Supplementary Services Settings page (Setup menu > Signaling & Media tab > Gateway folder > DTMF & Supplementary > Supplementary Services Settings). |
|
b.
|
In the 'Hook-Flash Code' (HookFlashCode) field, enter the digit pattern. |
|
2.
|
Configure the hook-flash transport type: |
|
a.
|
Open the DTMF & Dialing page (Setup menu > Signaling & Media tab > Gateway folder > DTMF & Supplementary > DTMF & Dialing). |
|
b.
|
From the 'Hook-Flash Option' (HookFlashOption) drop-down list, select the required transport type. |
